Product List
CNC Machining Center
CNC system of CNC machining center includes Mitsubishi, Fanuc, Siemens automatic lubrication system.
Parameters of CNC Machining Center
Type |
|
XH714 | XH715 | XH716 | XH716L | XH718 | XH719 |
Axis travel |
|
|
|
|
|
|
|
Travel for X/Y/Z axis | mm | 800/430/520 | 800/500/550 | 1000/600/650 | 1100/600/600 | 1500/800/700 | 1800/900/700 |
Distance from spindle nose to table surface | mm | 150-670 | 130-630 | 130-780 | 115-715 | 150-850 | 150-850 |
Distance from spindle center to column surface | mm | 530 | 550 | 600 | 700 | 850 | 1000 |
Worktable |
|
|
|
|
|
|
|
Worktable(length*) | mm | 1000*430 | 950*500 | 1300*600 | 1200*600 | 1700*800 | 2000*900 |
Maximumloade of table | Kg | 500 | 600 | 1000 | 600 | 1500 | 1700 |
T-slot(*number*pitch) | mm | 18*3*125 | 18*3*150 | 18*5*120 | 18*5*105 | 22*5*150 | 22*5*150 |
Main spindle |
|
|
|
|
|
|
|
Spindle speed | rpm | 60-8000 | 60-8000 | 60-8000 | 60-8000 | 60-6000 | 60-6000 |
Tool holder mode(type/dia.) |
|
BT40/φ150 | BT40/BT50 | BT50/φ190 | |||
Drive manner of spindle |
|
Belt drive | |||||
Motor power of spindle | Kw | 5.5/7.5(30min) | 7.5/11(30min) | 11/15(30min) | 11/15(30min) | 18.5/22(30min) | 18.5/22(30min) |
Feeding system |
|
|
|
|
|
|
|
CNC control system |
|
FANUC/Mitsubish/Siemens | |||||
X,Y axis guide screw | mm | 4008 | 4008 | 4010 | 4012 | 6310 | 5508 |
Z-axis guide screw | mm | 4008 | 4008 | 4010 | 4012 | 5010 | 5508 |
Drive connection way |
|
Direct connection | |||||
Rapid shift of axis of X&Y/Z | m/min | 16/24 | 16/24 | 20/24 | 30/24 | 20/24 | 16/24 |
Max. cutting feed speed | mm/min | 5-5000 | 5-5000 | 5-5000 | 5-6000 | 5-5000 | 5-5000 |
Motor power of three axes | Kw | 1.2/1.8 | 1.4/1.8 | 2.5 | 2.5 | 4/7 | 4/7 |
Tool exchange automatic(Only for CNC machining center) |
|
|
|
|
|
|
|
Standard tool capacity | piece | 16/16 | 20/20 | 24/24 | 24/24 | 24/24 | 24/24 |
Max. tool dia./length | mm | Disc:φ78/250,Hats-:φ90/300 | φ112/350 | ||||
Max. tool dim. | mm | φ120 | φ200 | ||||
Max. tool weight | Kg | 7,8 | 18 | ||||
Tool exchange manner |
|
Pneumatic | |||||
Clamping and loosening of tool |
|
Automatic (four claws) | |||||
Average tool exange time | Sec | Disc-:2-3,hats-:6-8 |